Video
|
|
Input Signal Types
|
DM® CAT (DigitalMedia™ over twisted-pair copper wire)[1]
|
|
Output Signal Types
|
HDMI® or DVI[3] to switcher backplane and HDMI OUT connector
|
|
Formats
|
HDMI w/Deep Color & 3D, DVI, HDCP content protection support
|
|
Input Resolutions, Progressive
|
640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, plus any other resolution allowed by HDMI up to 165MHz pixel clock
|
|
Input Resolutions, Interlaced
|
720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to 165MHz pixel clock
|
|
Output Resolutions
|
Matched to inputs
|
Audio
|
|
Input Signal Types
|
DM CAT
|
|
Output Signal Types
|
HDMI (multi-channel) to switcher backplane and HDMI OUT connector, analog stereo 2-channel[2], allows audio breakaway
|
|
Formats
|
Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, Up to 8ch PCM
|
|
Digital-To-Analog Conversion
|
24-bit 48 kHz
|
|
Performance (analog)
|
Frequency Response: 20Hz to 20kHz ±0.5dB; S/N Ratio: >95dB, 20Hz to 20kHz A-weighted; THD+N: <0.005% @ 1kHz; Stereo Separation: >90dB
|
|
Volume Gain Range (analog)
|
-80dB to 0dB, adjustable from 0% to 100%
|
Connectors
|
|
HDMI OUT
|
(1) 19-pin Type A HDMI female; HDMI digital video/audio output; Also supports DVI[3]
|
|
DIGITAL MEDIA, D & M
|
(1) DM CAT input composed of (2) 8-pin RJ45 female, shielded; Connects to the DM CAT output of a DM transmitter or other DM device via DM-CBL cable[1]
|
|
NET
|
(1) 4-pin 3.5mm detachable terminal block, DMNet port; Connects to the DMNet port of a DM transmitter or other DM device via DM-CBL cable[1]
|
|
AUDIO OUT
|
(2) RCA female; Unbalanced stereo line-level audio output with level control[2]; Maximum Output Level: 2 Vrms; Output Impedance: 100 Ohms nominal
|
DM Cable Length
|
|
Cable Type: DM-CBL DigitalMedia Cable
|
Maximum length without, between, before, or after repeaters:
· 200 ft (60 m) for 720p, 1080i, 1080p24
· 200 ft (60 m) for 1024x768 @75Hz
· 150 ft (45 m) for 1080p60
· 150 ft (45 m) for 1280x1024 @75Hz
· 150 ft (45 m) for 1920x1200 @60Hz
· 125 ft (38 m) for 1600x1200 @60Hz
· 50 ft (15 m) for 1080p60 Deep Color
Maximum total length using up to 2 repeaters:
· 450 ft (137 m) for 720p, 1080i, 1080p24
· 450 ft (137 m) for 1024x768 @75Hz
· 450 ft (137 m) for 1080p60
· 450 ft (137 m) for 1280x1024 @75Hz
· 450 ft (137 m) for 1920x1200 @60Hz
· 375 ft (114 m) for 1600x1200 @60Hz
· 150 ft (45 m) for 1080p60 Deep Color
|
Construction
|
|
Plug-in card, occupies (1) DM Switcher input card slot, includes metal faceplate w/black finish
|
Weight
|
|
8.0 oz (227 g)
|