Video
|
|
Switcher
|
6x1 combination digital/analog switch, Crestron QuickSwitch HD®
|
|
Input Signal Types
|
DM CAT (DigitalMedia over shielded twisted-pair copper wire), HDMI®, DVI[1], DisplayPort Multimode[1], RGB, component (YPbPr)[2], S-Video (Y/C)[2], composite[2]
|
|
Output Signal Types
|
DM CAT, HDMI, DVI[1]
|
|
Formats
|
HDMI, DVI, HDCP content protection support, 3D (via DM only), RGBHV up to UXGA/WUXGA, HDTV up to 1080p60, NTSC or PAL
|
|
Input Resolutions, HDMI, Progressive
|
640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, plus any other resolution allowed by HDMI up to 165MHz pixel clock
|
|
Input Resolutions, HDMI, Interlaced
|
720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to 165MHz pixel clock
|
|
Input Resolutions, RGB
|
640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 1024x768@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz
|
|
Input Resolutions, Component
|
480i, 576i, 480p, 576p, 720p50, 720p60, 1080i25 (1125 lines), 1080i30, 1080p30, 1080p50 (1125 lines), 1080p60
|
|
Input Resolutions, Composite and S-Video
|
480i, 576i
|
|
Output Resolutions
|
Matched to inputs
|
|
Analog-To-Digital Conversion
|
10-bit 165 MHz per each of 3 channels
|
Audio
|
|
Switcher
|
6x1 combination digital/analog switch, limited audio breakaway[4]; independent input compensation and master volume adjustment for analog output
|
|
Input Signal Types
|
DM CAT, HDMI, DisplayPort Multimode[1], S/PDIF coaxial, analog stereo
|
|
Output Signal Types
|
DM CAT, HDMI, analog stereo
|
|
Formats, HDMI and SPDIF
|
Dolby Digital®, Dolby Digital EX, DTS®, DTS-ES, DTS 96/24, 2ch PCM
|
|
Formats, HDMI only
|
Up to 8ch PCM
|
|
Formats, Analog
|
Stereo 2-Channel
|
|
Analog-To-Digital Conversion
|
24-bit 48 kHz
|
|
Digital-To-Analog Conversion
|
24-bit 48 kHz
|
|
Volume Gain Range (analog out)
|
-80dB to 0dB, adjustable from 0% to 100%
|
|
Input Compensation (analog out)
|
±10dB per input
|
|
Performance (analog)
|
Frequency Response: 20Hz to 20kHz ±0.75dB; S/N Ratio: >90dB, 20Hz to 20kHz A-weighted; THD+N: <0.05% @ 1kHz; Stereo Separation: >90dB
|
Communications
|
|
DigitalMedia
|
DM CAT, DMNet, HDCP management, EDID format management, CEC
|
|
Ethernet
|
10BaseT/100BaseTX, auto-switching, auto-negotiating, auto-discovery, full/half duplex, TCP/IP, UDP/IP, CIP, DHCP, RSTP
|
|
USB
|
Supports USB HID class devices
|
Ethernet Switch
|
|
Provides (1) onboard 10BaseT/100BaseTX Ethernet port, (1) internal 10BaseT/100BaseTX Ethernet port for the switcher, and (4) remote 10BaseT/100BaseTX Ethernet ports via select outboard devices
|
Connectors
|
|
VIDEO IN 1
|
(3) BNC female comprising (1) auto-sensing multi-format analog video input; Signal Types: Component (YPbPr), S-Video (Y/C), or composite input; Input Level: 1 Vp-p nominal; Input Impedance: 75 Ohms nominal
|
|
RGB IN 2
|
(1) DB15HD female, RGB (VGA) or component (YPbPr) video input[2]; Formats: RGBHV, RGBS, RGsB, YPbPr; Input Levels: 0.5 to 1.5 Vp-p with built-in DC restoration; Input Impedance: 75 Ohms; Sync Input Type: Autodetect RGBHV, RGBS, RGsB, YPbPr; Sync Input Level: 3 to 5 Vp-p; Sync Input Impedance: 1k Ohms
|
|
AUDIO IN 1 – 2
|
(2) 5-pin 3.5mm detachable terminal blocks; Balanced/unbalanced stereo line-level inputs; AUDIO IN 1 and SPDIF IN 1 inputs are mutually exclusive; Input Impedance: 24k Ohms balanced/unbalanced; Balanced Input Level: 4 Vrms maximum; Unbalanced Input Level: 2 Vrms maximum
|
|
HDMI IN 3
|
(1) 19-pin Type A HDMI female; HDMI digital video/audio input
|
|
SPDIF IN 1
|
(1) RCA female, S/PDIF coaxial digital audio input; SPDIF IN 1 and AUDIO IN 1 inputs are mutually exclusive; Input Impedance: 75 Ohms
|
|
AUDIO OUT
|
(1) 5-pin 3.5mm detachable terminal block; Balanced/unbalanced stereo line-level output, variable level; Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced; Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
|
|
DM IN D/M 4 – 6
|
(3) DM CAT inputs, each composed of (2) 8-pin RJ45 female, shielded; Connect to DM CAT outputs of DM transmitters or other DM devices via DM-CBL cable[3]
|
|
DM IN 24ABG
|
(3) 4-pin 3.5mm detachable terminal blocks, DMNet ports; Connect to DMNet ports of DM transmitters or other DM devices via DM-CBL cable[3]
|
|
DM OUT D/M
|
(1) DM CAT output composed of (2) 8-pin RJ45 female, shielded; Connects to DM CAT input of a DM receiver/room controller, switcher, or other DM device viaDM-CBL cable[3]
|
|
DM OUT 24ABG
|
(1) 4-pin 3.5mm detachable terminal block, DMNet port; Connects to DMNet port of a DM receiver/room controller, switcher, or other DM device via DM-CBL cable[3]
|
|
EXT PWR
|
(1) 3-pin 3.5mm detachable terminal block, power selection port; Connects to an external power supply[5], or to the internal power source via a jumper, to power the DM devices connected to DM IN 4 – 6 and DM OUT; Maximum Load: 75 Watts (3.13 Amps @ 24 Volts DC) total for all ports when connected to external power supply[5], otherwise limited to available DMNet power (see “Power Requirements” below)
|
|
HDMI OUT
|
(1) 19-pin Type A HDMI female; HDMI digital video/audio output; Carries same audio and video signals as DM OUT
|
|
USB HID
|
(1) USB Type B female; USB 1.1 device port for connection to the USB host interface of a computer or other USB HID-compliant host device
|
|
LAN
|
(1) 8-wire RJ45 female w/2 LED indicators; 10BaseT/100BaseTX Ethernet port; Green LED indicates link status; Yellow LED indicates Ethernet activity
|
|
100-240V ~2.3A 50/60Hz
|
(1) IEC C14 male chassis plug, main power input; Mates with removable power cord, included
|
|
G
|
(1) 6-32 screw, chassis ground lug
|
|
COMPUTER (front)
|
(1) USB Type B female; USB 1.1 computer console port (6 ft cable included)
|
DM Cable Length
|
|
Cable Type: DM-CBL DigitalMedia Cable
|
Maximum length per port without, between, before, or after repeaters:
· 200 ft (60 m) for 720p, 1080i, 1080p24
· 200 ft (60 m) for 1024x768 @75Hz
· 150 ft (45 m) for 1080p60
· 150 ft (45 m) for 1280x1024 @75Hz
· 150 ft (45 m) for 1920x1200 @60Hz
· 125 ft (38 m) for 1600x1200 @60Hz
Maximum total length per port using up to 2 repeaters:
· 450 ft (137 m) for 720p, 1080i, 1080p24
· 450 ft (137 m) for 1024x768 @75Hz
· 450 ft (137 m) for 1080p60
· 450 ft (137 m) for 1280x1024 @75Hz
· 450 ft (137 m) for 1920x1200 @60Hz
· 375 ft (114 m) for 1600x1200 @60Hz
|
Controls and Indicators
|
|
PWR
|
(1) green LED, indicates operating power supplied via Main Power Input
|
|
USB HID DISABLED
|
(1) red LED, indicates the COMPUTER port is in use causing USB HID to be disabled
|
|
RESET
|
(1) recessed miniature pushbutton for hardware reset, reboots the switcher
|
|
SYNC
|
(1) pushbutton and red LED, selects SYNC mode so the INPUTS LEDs indicate input signal presence
|
|
ROUTE
|
(1) pushbutton and red LED, selects ROUTE mode to allow routing changes
|
|
INPUTS 1 – 6
|
(6) pushbuttons and red LEDs, select input for routing
|
|
SETUP (rear)
|
(1) red LED and (1) miniature recessed pushbutton for Ethernet auto-discovery
|
Power Requirements
|
|
Main Power
|
90 Watts @ 100-240 Volts AC, 50/60 Hz
|
|
Available DMNet Power
|
30 Watts (1.25 Amps @ 24 Volts DC) from internal power supply
|
Environmental
|
|
Temperature
|
32° to 104°F (0° to 40°C)
|
|
Humidity
|
10% to 90% RH (non-condensing)
|
|
Heat Dissipation
|
307 BTU/Hr
|
Enclosure
|
|
Chassis
|
Metal with black finish, vented sides, fan-cooled
|
|
Faceplate
|
Extruded aluminum, black finish with polycarbonate label overlay
|
|
Mounting
|
Freestanding or 2U 19-inch rack-mountable (adhesive feet and rack ears included)
|
Dimensions
|
|
Height
|
3.47 in (89 mm) without feet
|
|
Width
|
17.03 in (433 mm), 19.00 in (483 mm) with ears
|
|
Depth
|
12.21 in (310 mm)
|
Weight
|
|
7.5 lb (3.4 kg)
|