Memory
|
Default and maximum DRAM
|
1 GB
|
Default and maximum flash memory
|
1 GB
|
Interface Support
|
Console or auxiliary port
|
● RJ-45: Single dual-purpose port, which provides direct connection to a console or external modem for management or backup access point
|
Mini-USB port (RSVD)
|
● Mini-USB port to support remote 4G LTE diagnostics and monitoring tools (QUALCOMM CAIT and Spirent UDM)*
|
WAN interfaces
|
● Wireless WAN with 4G LTE, 3.7G, 3.5G, and 3G speeds
● 10/100/1000 Gigabit Ethernet port
● Cisco Smart Serial Interface (sync, async, and bisync)
|
LAN interfaces
|
● Four 10/100 Fast Ethernet ports
|
LEDs
|
● System OK (green/amber)
● Activity (green)
● WWAN (green/amber)
● SIM status (green/amber)
● RSSI (green)
● 3G/4G LTE service (green/amber)
● GPS (green/amber)
● Speed and link for Gigabit Ethernet WAN port (green)
● Speed and link for all Fast Ethernet LAN ports (green)
|
Serial WAN interface
|
● Support for both synchronous and asynchronous modes
● Synchronous maximum speed of up to 8 Mbps
● Asynchronous maximum speed of up to 115.2 kbps
● Support for bisync modes
● Support for network clock synchronization
|
Serial protocol support
|
● EIA-232, EIA-449, EIA-530, EIA-530A, V.35, and X.21
|
Cisco Smart Serial Cabling
|
Cisco Smart Serial connectors and supported cables:
|
|
Product Number
CAB-SS-V35MT
CAB-SS-V35FC
CAB-SS-232MT
CAB-SS-232FC
CAB-SS-449MT
CAB-SS-449FC
CAB-SS-X21MT
CAB-SS-X21FC
CAB-SS-530MT
CAB-SS-530AMT
|
Cable Type
V.35 DTE
V.35 DCE
EIA/TIA-232 DTE
EIA/TIA-232 DCE
EIA/TIA-449 DTE
EIA/TIA-449 DCE
X.21 DTE
X.21 DCE
EIA/TIA-530 DTE
EIA/TIA-530A DTE
|
Length
10 ft (3m)
10 ft (3m)
10 ft (3m)
10 ft (3m)
10 ft (3m)
10 ft (3m)
10 ft (3m)
10 ft (3m)
10 ft (3m)
10 ft (3m)
|
Connector Type
Male
Female
Male
Female
Male
Female
Male
Female
Male
Male
|
Physical Characteristics
|
Physical dimensions
(H x W x D)
|
Cisco 819G
1.67 x 7.7 x 7.2 in. (42 x 196 x 183 mm)
|
Cisco 819HG
1.73 x 7.7 x 8.1 in. (44 x 196 x 206 mm)
|
Weight
|
Cisco 819G
2.3 lb (1.0 kg)
|
Cisco 819HG
3.2 lb (1.5 kg)
|
Mean time between failure (MTBF—Ground Benign)
|
● C819G-4G-V-K9: 214,000 hours
● C819G-4G-A-K9: 226,000 hours
● C819G-4G-G-K9: 293,000 hours
|
● C819HG-4G-V-K9: 214,000 hours
● C819HG-4G-A-K9: 226,000 hours
● C819HG-4G-G-K9: 293,000 hours
|
Maximum platform power consumption
|
Cisco 819G
11 watts
|
Cisco 819HG
11 watts
|
Environmental operating range
|
Cisco 819G
32 to 104°F (0 to 40°C)
|
Cisco 819HG
–13 to 140°F (–25 to 60°C)
|
Operating altitude
|
40ºC up to 5000 ft*
Above 5000 ft derate maximum operating temperature 1.50C per 1000 ft
Maximum altitude: 10,000 ft
|
55ºC up to 5000 ft*
Above 5000 ft derate maximum operating temperature 1.50C per 1000 ft
Maximum altitude: 10,000 ft
|
Standard safety certifications
|
● UL 60950-1, 2nd edition
● CAN/CSA C22.2 No. 60950-1, 2nd edition
● EN 60950-1, 2nd edition
● CB to IEC 60950-1, 2nd edition with all group differences and national deviations
|
EMC emissions
|
EN55022/CISPR22, CFR 47 Part 15, ICES003, VCCI-V-3, AS/NZS CISPR22, CNS13438, EN300-386, EN61000-3-2, EN61000-3-3, and EN61000-6-1
|
EMC immunity
|
EN55024/CISPR24, (EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11), and EN300-386
|
Radio immunity
|
EN301 489-1, EN 301 489-7, and EN301 489-24
PTCRB-approved. device ID Cisco C819HG-4G-A-K9 and C819G-4G-A-K9
|
Cellular radio
|
EN 301 908-1, EN 301 908-2, EN 301 511, 47 CFR Part 22, 47 CFR Part 24 and EN 301 908-13
|
Operating conditions (Cisco 819HG only)
|
● Noncondensing humidity: 95%
● IP 41 per IEC 60529 for Vertical Falling Water
● Pollution 3 for Dust
Operational Vibration:
● MIL-STD-810G 2.2.1 Category 4; truck transportation over U.S. highways-restrained cargo
● EN61373 functional random vibe—category 1, class B
● SAE J1455 operating random vibe cap mounted truck
● SAE J1455 Operating Sinusoidal Vibration, Category 3
Nonoperational Vibration:
● MIL-STD-810G 2.3.9 Category 20—Ground vehicles
● EN61373 simulated non-op long-life vibe—category 1, class B
● SAE J1455 Nonoperating Sinusoidal Vibration, Category 3
Operational Shock:
● MIL-STD-810G 2.2.2 Procedure 1, Functional Shock
Nonoperational Shock:
● MIL-STD-810G 2.2.2 Procedure 5, Crash Hazard
● MIL-STD-810G 2.2.2 Procedure 6, Bench Handling
● EN61373 non-op shock class B
● SAE J1455 4.11.3.1 Handling test
|
Power specifications
|
AC Power Adapter:
● Maximum power consumption: 25W
● Meets efficiency Level V
● Input voltage and currents supported: 100–264 VAC <0.5A
● Maximum output power rating: 20W
● For IP 41 need additional enclosure
DC Power Adapter:*
● Maximum power consumption: 26W
● Input voltage and currents supported: 10 VDC minimum, 13.8 VDC nominal, 36 VDC maximum operating, and 42 VDC absolute maximum
● Maximum output power rating: 20W
● IP 41 compliant
● Default: PWR2-20W-AC AC power supply
|